SHANDONG SUNRISE CNC MACHINE CO.,LTD.
Professional manufacturer of CNC angle machine, CNC angle punching machine, CNC angle drilling machine, tower processing machine.
TPHD2020/TPHD2525/TPHD3030 High Speed CNC Drilling Machine
Category By Product And Industry » Boiler/Pressure Vessel/Heat Exchanger Processing Machines » TPLD2020/ TPLD2525/ TPLD3030 CNC Drilling Machine For Plates
Applicable Industry of TPHD2020/TPHD2525/TPHD3030 High Speed CNC Drilling Machine

Used for the drilling processing for tube plate, clapboard and flange, in petrochemical, boiler, and wind power flange industries, also for joint plates in building, bridge, iron tower, etc.

Product Composition of TPHD2020/TPHD2525/TPHD3030 High Speed CNC Drilling Machine

1. Worktable For Square and Round Work-piece

2. Thickened and Enhanced Movable Gantry

3. High Speed Drill Head

4. Electric Cabinet with CNC System

5. Hydraulic Station

6. Automatic Chip Conveyor with Chip Carriage

7. Automatic Recycling Cooling Water System

Main Description of TPHD2020/TPHD2525/TPHD3030 High Speed CNC Drilling Machine

1. Function: Drilling, Tapping, Milling, Chamfering and so so.

2. Work-piece: Steel Plates, Flanges, Tube Sheets, Pressure Vessels and so on.

3. High precision: ±0.1mm.

Technical Parameters of TPHD2020/TPHD2525/TPHD3030 High Speed CNC Drilling Machine

Model

TPHD2020

TPHD2525

TPHD3030

Max. size of workpiece (mm)

Max. hole distance L×W (mm)

2000×2000

2500×2500

3000×3000

Max. thickness (mm)

300

Worktable

Width/distance of T groove (mm)

28/500

Drilling spindle

Quantity

2

Spindle taper

BT50

Max. diameter of drilling (mm)

Φ40Φ50

Rotation speed(stepless) (r/min)

30~2000

Motor power of spindles (kW)

2×22

Spindle nether surface to work table (mm)

280~780

(X axis) Longitudinal movement of gantry

Max. stroke (mm)

2000

2500

3000

X axis feeding speed (m/min)

0~8

X axis servo motor power (kW)

2×3

(Y axis) Horizontal move

Max. distance of spindles (mm)

2000

2500

300

Y axis feeding speed (m/min)

0~8

Y axis servo motor power (kW)

2×3

(Z axis) Vertical move

Z axis Max. stroke (mm)

500

Z axis feeding speed (m/min)

0-4

Z axis servo motor power (kW)

2×3

Positioning precision

X,Yaxis

≤0.1/ (full length)

Re-positioning precision

X,Yaxis

≤0.05

Hydraulic system

Hydraulic pump (Mpa)/ (L/min)

7 /25

Motor for hydraulic pump (kW)

3

Chip removal and cooling

Type of chip-conveyor

Chain-plate type

Quantity of chip-conveyor

1

Chip-removal speed (m/min)

1

Motor for swarf conveyor (kW)

0.75

Motor for cooling pump (kW)

2×3+0.75

Overall dimension

L×W×H (m)

Appr. 5.2×5.1×3.6

Appr. 5.7×5.6×3.6

Appr. 6.2×6.1×3.6

Weight of machine (t)

Appr. 30

Appr. 35

Appr. 40

Product Features of TPHD2020/TPHD2525/TPHD3030 High Speed CNC Drilling Machine

1. Heavy-load linear roller guide pairs are equipped on two sides of the machine bed respectively. The longitudinal movement of the gantry's two sides is driven synchronously via AC servo motor and precise ballscrew pair of big pitch.

2. Two movable slides are equipped on the cross beam of gantry. The sliders are guided by two linear roller guide pairs and driven by AC servo motor and precise ballscrew pair of big pitch respectively.

3. The slides on the cross beam are equipped with vertical CNC feeding ram-type drilling spindle, which adopts special conversion motor with heavy load for spindle. The motor drives the spindle via synchronous belt. The drilling spindle adopts Taiwan precision spindle (innercooling) with disk spring automatic broach mechanism, hydraulic cylinder loosing cutter, very convenient to change shank.

4. The machine is equipped with hydraulic system to finish the hydraulic balance of vertical ram and hydraulic cutter loosing of spindle.

5. It adopts FAGOR8055 CNC system of Spain, equipped with RS232 interface and LCD screen. The automatic programming provided can not only generate processing programs automatically, but also preview hole position before drilling.

6. It is equipped with chain-plate type automatic chip-conveyor and chip collection trolley. The cooling system is equipped with paper filer, high-pressure innercooling pump and low-pressure outercooling pump, which are used for innercooling or outercooling of cutter.

Welcome to send your message to us
*Email
!!
*Content
!
Product Name
Your Name
Company
Tel/Fax.
WhatsApp